Products
Introduction of GL Aluminum Zinc Coated Galvalume Steel Coils /Sheet
	
GL-55% Aluminum Zinc Coated Galvalume Steel Coils/Sheet also called Alu-Zinc or Al-An steel coils/sheet,It’s produced basis on col-rolled steel sheet with various strength and thickness specifications.The pre-coated steel sheet is obtained by hot -dipping 55% Al-An alloy coating on both sides.The percentage of the pre-coated steel sheet is about 55% Al,43.5% Zn and 1.6% Si.It integrates the physical protection and high durability of AL and electrochemical protection of Zn.
	
Features of GL Aluminum Zinc Coated Galvalume Steel Coils /Sheet
Excellent resistance to corrosion.
excellent heat resistance
the good bonding between the paint film and the coating
has effective processing capabilities,
able to be welded, sheared, punched, etc.;
Excellent surface conductivity can be foBenefitsnifits of Aluminum-zinc alloy coated steel sheets.
	
Application of GL 55% Aluminum Zinc Coated Galvalume Steel Coils /Sheet
Construction: Roofs, Walls, Garages, Acoustic Walls, Plumbing and Modular Houses, etc.
	Automotive: mufflers, exhaust pipes, wiper attachments, fuel tanks, truck boxes, etc.
Home appliances: refrigerator back panel, gas stove, air conditioner, electronic microwave oven, LCD frame,
	CRT explosion-proofbelt, LED backlight, electrical cabinet, etc.
Agricultural use: pig house, chicken house, granary, greenhouse pipes, etc.
Others: Thermal insulation cover, heat exchanger, dryer, water heater, etc.
	
Specifications of GL 55% Aluminum Zinc Coated Galvalume Steel Coils /Sheet
| Width | 600mm-1250mm | 
| Thickness | 0.15mm-2.3mm | 
| Length | customized | 
| Zinc Coating | AZ 50gr/m2-AZ 185gr/m2 (double | 
| Surface | Oiled(O),Skinpass Resistant to Fingerprints(AFP) | 
| Chemical treatment | Chromated | 
| Spangle | Regular spangle,Minimum spangle | 
| Grade | JIS G3321-SGLCC,SGLC400-570,(G550)EN10346-DX51D+AZ,DX53D+AZ,S250-S550,ASTM A792M CSB,SS255-SS550 | 
| Packing | Export standard packing ,3 Layers-kraft paper outside+waterproof plastic film in the middible+steel plate vovered with strips | 
| Coil Weight | 3-14 tons | 
| Coil ID | 508/610mm | 
| Color | Silver,Blue,Green,Golden | 
| HRB | Soft Hard(<60),Medium Hard(60-85),Full Hard(85-95) | 
| Rar Materials | Cold rolled base | 
	
	
	
	
	
	
	
	
	
	
	
	
	
	
	
	
	
	
	
	
	
	
	
	











